中世紀(jì)休閑椅

I started off by making the ottoman or a.k.a as the foot rest. It was made with reference dimeio of 21.5W and 25.8 Depth. To start i made the front rounded shape and extruded and that on a perpendicular side made a sketch of the same thing just upside down and cut the corne do be left with a rounded figure. I then used the shell feature on it by 0.5 inches. To make the cushion i just extruded the empty space and used fillet. For the rolling legs i just made a circle with extrusion from the bottom about 8 inches long and then off the bottom of that used two perpendicular plane to make the angles legs which i extruded by 1.5 inches mid way.To make the main chair i used the same technique as for the ottoman except bigger and with a trapezoid for the future arm rests. For the two back piece i used similar techniques of making a sketch extruding it and then using shell . For the cushio i used the same method as the ottoman where i made a sketch of empty space and filled it and used fillet for edges. To make the arm rests i made a sketch mid way through those trapazoids and made a candy cane type shape and used offset by 2 inches and extruded that almost the back and by like 6 inches from the edge. For the bottom i made a 1.5 diameter 2-3 inch stick and created one leg i like and used pattern to pattern that across 5 times.